>

 

 

 

 

 

 

Home to eRench.com

California Restaurant Reviews

Of Interest to Foodies

Back to Adventures

Email Eric 

 

 

 

 

 

 

Sunday, June 19, 1978, my brother-in-law, Greg Wilson and I took a ride over Donner Pass, on a Southern Pacific freight train, from Roseville, CA to just west of Truckee, CA.  Crazy thing to do, but that was 1978, and worlds apart from today.  Riding freight trains in 1978 was totally normal,  an everyday thing, and Southern Pacific, like most other railroads simply looked the other way when riders boarded freight trains.

I give credit to my brother-in-law, Greg Wilson, and my late dad, Ted Rench for taking the photos, and publishing them with their generous permission.

During the train ride, Greg took 35mm photos, while my dad took 35mm photos from the side, as he and my former spouse, Robbin, supported our ride by paralleling us from nearby roads.  I was busy taking movies with a Super 8mm movie camera.  Funny, I can't recall the make or model of the movie camera.

Photo:  We're riding the train east and heading into Tunnel #18, near Newcastle, which was the first of many tunnels we'd enjoy during our six hour trip over the Roseville Subdivision.

We left Turlock at something like 06:00 in the morning to begin the 2-1/2 hour drive to Roseville to catch a eastbound freight train over Donner Summit.

Greg and I waited at the east end of the Roseville yard for over three hours - with my brother Paul, my wife Robbin and Dad waiting nearby - until we were finally able to catch a departing freight train.  

A packaged lumber car wasn't our first choice to ride, but after waiting over three hours, we were happy to climb aboard any car that was available.  As the train began moving east, we grabbed our plastic gallon water jugs, and climbed aboard, while Dad, Robbin and Paul watched from the safety of Vernon Street, at the east end of the Roseville, CA yard, at mile post 106.4

Again... back on June 19, 1978 and even at the time this was a very dangerous practice, but was largely accepted, by the railroad and society.

Today, the danger still exists and if you attempt to ride a freight train, you'll most likely be rewarded with a trip to jail, rather than a trip over Donner Pass.

Photo:  I'm taking Super 8mm movies of the trip over Donner Pass as Greg snaps my photo.  Thank you Greg Wilson for the many photos you took of this epic trip. We've just passed Tunnel #18, east of Newcastle, and we're heading east on the #2 track, approaching Auburn, CA and the famous Bloomer Cut.

Photo:  You have to LOVE the Placer County scenery, as we look west toward Sacramento, as our train passes mile post 123.8, just east of Newcastle.

Photo:  Greg and I enjoy the ride, as Ted Rench takes the photo, as we pass through the east of Colfax, at the Grass Valley Highway crossing.

Photo:  Paul, Robbin and Dad take photos of us as we cross Grass Valley Highway, in Colfax, CA.  Don't you love that vintage 1974 Chevy pickup truck in the background?

Photo:   We're heading east as the train passes under Interstate 80 at Alta, mile post 156.3.

Photo:  Interstate 80 is above us, as we pass under it, at mile post 156.3, just east of Alta, CA..  As I recall, it was a very hot afternoon, with temperatures in the 95+ degree range, but Greg and I took the ride like troopers, as we were in our mid-20's, and nothing seemed to bother us in the persuit of today's endevor.

Photo:  Greg stands and waves, as I sit and take Super 8mm movies.  Thanks to Ted Rench for the photo.

Photo:  Quite a photo as #9313 west meets us at the east end of Blue Canyon.  Thanks to Greg Wilson for this excellent photo.  I'm in the photo taking Super 8mm movies.  Cheers!

Photo:  Heading east into Tunnel #1, or #35, depending how you look at it, but it's at mile post 164.35 on the Roseville Subdivision.

Photo:  Greg is taking photos and I'm sitting and waving at the photographer as we're enjoying the ride on the plywood car. We're at Emigrant Gap, and it's a great place to take photos. Thanks, Ted Rench, for the excellent photo.

Photo:  Can you say "Cisco?"  Were at mile post 178.3, heading into to Cisco, and ready to cross the amazing signal bridge at Cisco, mile post 179.6.

Photo:  Stunning shot as the tracks divide and enter the tunnels at Troy, mile post 185.3.  There are access roads to Troy, but you need four wheel drive, and there are gates that are locked most of the time.

Photo:  At Troy, mile post 185.3, Dad and Robbin were able to catch up to us and snap our photo as we enjoy our ride east.

Photo:   I'm seated on top of the bulkhead car, loaded with packaged plywood, as Greg takes my photo.  Yep... I'm using a vintage Mamaya Sekor 35mm camera, complete with a 50mm screw mount lens.  Good stuff for June 1978!

Photo:  Entering Shed 47, with a great view from on top of a bulkhead flat car, loaded with finished lumber.

Photo:   Hello Donner Pass, as we move east on a Southern Pacific freight train.

Please keep in mind back in June, 1978, hopping freight trains was technically illegal, but rarely enforced by railroads, and many major railroads, including Southern Pacific, simply tolerated the practice of "passengers" riding freight trains, and looked the other way.

Fast forward to the mid 2020's and things have significantly changed. Don't even THINK of hopping a freight train for a ride over Donner Pass!

Photo:  Wer'e emerging from the mile long Donner Pass tunnel and we're about to see daylight at Andover, mile post 198.7.  As I recall, it was interesting to hang on to the plywood car as we headed eastbound throuh the tunnel.  For a few few minutes, it was total darkness and I lost all touch with direction, either forward and reverse, or up and down.  It was scary, so I just hung on and waited until the end of the tunnel appeared.

Photo:  The end of our journey, around 06:30 early Sunday evening, June 19, 1978, with Southern Pacific #9186,  an EMD SD45T-2 leading our train. We wisely got off the stopped train at the West Truckee, mile post 205.6 and my dad and wife were waiting to pick us up.

We wisely decided to get off at West Truckee, mile post 205.6, as the train stopped.  Dad and Robbin were waiting on the parallel road, so it was easy to hitch a ride and get back to civilization, and back to the work grind the next day.

Looking back over a half century later, we did the right thing by getting off of the train, when we had the chance to disembark safely.

By today's standards, this unauthorized ride would have been both illegal and dangerous but back in 1978, it was an accepted practice, as nearly every Southern Pacific freight train had unpaid "passengers."  So we were just almost typical freight train riders, with the exception that we had a entorage of my dad and my wife paralleling our progress and keeping track of us as best as they could, thanks to 1978 standards.

Today, Union Pacific Railroad frowns upon unauthorized riders on freight trains, and those who choose to trespass on railroad property and freight trains are subject to arrest.

Today, would I hop a freight train and ride over "the hill" if it was still legal and acceptable?  NO WAY!  The practice is dangerous, illegal, and not a great live a long, happy life.

But, when you're 26 years old, you simply don't think about that kind of stuff and you simply go for it!!!  Greg and I enjoyed a great ride, and after over a half century later, I'm here to tell about it and post it on my website!

Copyright(c) 2026 eRench Productions. All rights reserved. We've been on the web since December 22, 2002.